Documentation Center

  • Trials
  • Product Updates

Quadratic Programming Algorithms

Quadratic Programming Definition

Quadratic programming is the problem of finding a vector x that minimizes a quadratic function, possibly subject to linear constraints:

such that A·x ≤ b, Aeq·x = beq, l ≤ x ≤ u.

interior-point-convex quadprog Algorithm

The interior-point-convex algorithm performs the following steps:

  1. Presolve/Postsolve

  2. Generate Initial Point

  3. Predictor-Corrector

  4. Multiple Corrections

  5. Total Relative Error

Presolve/Postsolve

The algorithm begins by attempting to simplify the problem by removing redundancies and simplifying constraints. In particular, the presolve portion performs the following tasks, among others:

  • Check if any variables have equal upper and lower bounds. If so, check for feasibility, then fix and remove the variables.

  • Check if any linear inequality constraints involve just one variable. If so, check for feasibility, and change the linear constraint to a bound.

  • Check if any linear equality constraints involve just one variable. If so, check for feasibility, then fix and remove the variable.

  • Check if any linear constraint matrix has zero rows. If so, check for feasibility, and delete the rows.

  • Check if the bounds and linear constraints are consistent.

  • Check if any variables appear only as linear terms in the objective function and do not appear in any linear constraint. If so, check for feasibility and boundedness, and fix the variables at their appropriate bounds.

In the presolve step the algorithm might detect an infeasible or unbounded problem. If so, the algorithm halts and issues an appropriate exit message.

If the algorithm does not detect an infeasible or unbounded problem in the presolve step, it continues with the other steps. At the end, it reconstructs the original problem, undoing any presolve transformations. This final step is the postsolve step.

For details, see Gould and Toint [63].

Generate Initial Point

The initial point x0 for the algorithm is:

  1. Initialize x0 to ones(n,1), where n is the number of rows in H.

  2. For components that have both an upper bound ub and a lower bound lb, if a component of x0 is not strictly inside the bounds, the component is set to (ub + lb)/2.

  3. For components that have only one bound, modify the component if necessary to lie strictly inside the bound.

Predictor-Corrector

Similar to the fmincon interior-point algorithm, the interior-point-convex algorithm tries to find a point where the Karush-Kuhn-Tucker (KKT) conditions hold. For the quadratic programming problem described in Quadratic Programming Definition, these conditions are:

Here

  • is the extended linear inequality matrix that includes bounds written as linear inequalities. is the corresponding linear inequality vector, including bounds.

  • s is the vector of slacks that convert inequality constraints to equalities. s has length m, the number of linear inequalities and bounds.

  • z is the vector of Lagrange multipliers corresponding to s.

  • y is the vector of Lagrange multipliers associated with the equality constraints.

The algorithm first predicts a step from the Newton-Raphson formula, then computes a corrector step. The corrector attempts to better enforce the nonlinear constraint sizi = 0.

Definitions for the predictor step:

  • rd, the dual residual:

  • req, the primal equality constraint residual:

  • rineq, the primal inequality constraint residual, which includes bounds and slacks:

  • rsz, the complementarity residual:

    rsz = Sz.

    S is the diagonal matrix of slack terms, z is the column matrix of Lagrange multipliers.

  • rc, the average complementarity:

In a Newton step, the changes in x, s, y, and z, are given by:

However, a full Newton step might be infeasible, because of the positivity constraints on s and z. Therefore, quadprog shortens the step, if necessary, to maintain positivity.

Additionally, to maintain a "centered" position in the interior, instead of trying to solve sizi = 0, the algorithm takes a positive parameter σ, and tries to solve

sizi = σrc.

quadprog replaces rsz in the Newton step equation with rsz + ΔsΔz – σrc1, where 1 is the vector of ones. Also, quadprog reorders the Newton equations to obtain a symmetric, more numerically stable system for the predictor step calculation.

For details, see Mehrotra [47].

Multiple Corrections

After calculating the corrected Newton step, quadprog can perform more calculations to get both a longer current step, and to prepare for better subsequent steps. These multiple correction calculations can improve both performance and robustness. For details, see Gondzio [62].

Total Relative Error

quadprog calculates a merit function φ at every iteration. The merit function is a measure of feasibility, and is also called total relative error. quadprog stops if the merit function grows too large. In this case, quadprog declares the problem to be infeasible.

The merit function is related to the KKT conditions for the problem—see Predictor-Corrector. Use the following definitions:

The notation and means the linear inequality coefficients, augmented with terms to represent bounds. The notation similarly represents Lagrange multipliers for the linear inequality constraints, including bound constraints. This was called z in Predictor-Corrector, and was called y.

The merit function φ is

quadprog iterative display includes a column showing the merit function under the heading Total relative error.

trust-region-reflective quadprog Algorithm

Many of the methods used in Optimization Toolbox™ solvers are based on trust regions, a simple yet powerful concept in optimization.

To understand the trust-region approach to optimization, consider the unconstrained minimization problem, minimize f(x), where the function takes vector arguments and returns scalars. Suppose you are at a point x in n-space and you want to improve, i.e., move to a point with a lower function value. The basic idea is to approximate f with a simpler function q, which reasonably reflects the behavior of function f in a neighborhood N around the point x. This neighborhood is the trust region. A trial step s is computed by minimizing (or approximately minimizing) over N. This is the trust-region subproblem,

(6-77)

The current point is updated to be x + s if f(x + s) < f(x); otherwise, the current point remains unchanged and N, the region of trust, is shrunk and the trial step computation is repeated.

The key questions in defining a specific trust-region approach to minimizing f(x) are how to choose and compute the approximation q (defined at the current point x), how to choose and modify the trust region N, and how accurately to solve the trust-region subproblem. This section focuses on the unconstrained problem. Later sections discuss additional complications due to the presence of constraints on the variables.

In the standard trust-region method ([48]), the quadratic approximation q is defined by the first two terms of the Taylor approximation to F at x; the neighborhood N is usually spherical or ellipsoidal in shape. Mathematically the trust-region subproblem is typically stated

(6-78)

where g is the gradient of f at the current point x, H is the Hessian matrix (the symmetric matrix of second derivatives), D is a diagonal scaling matrix, Δ is a positive scalar, and ∥ . ∥ is the 2-norm. Good algorithms exist for solving Equation 6-78 (see [48]); such algorithms typically involve the computation of a full eigensystem and a Newton process applied to the secular equation

Such algorithms provide an accurate solution to Equation 6-78. However, they require time proportional to several factorizations of H. Therefore, for large-scale problems a different approach is needed. Several approximation and heuristic strategies, based on Equation 6-78, have been proposed in the literature ([42] and [50]). The approximation approach followed in Optimization Toolbox solvers is to restrict the trust-region subproblem to a two-dimensional subspace S ([39] and [42]). Once the subspace S has been computed, the work to solve Equation 6-78 is trivial even if full eigenvalue/eigenvector information is needed (since in the subspace, the problem is only two-dimensional). The dominant work has now shifted to the determination of the subspace.

The two-dimensional subspace S is determined with the aid of a preconditioned conjugate gradient process described below. The solver defines S as the linear space spanned by s1 and s2, where s1 is in the direction of the gradient g, and s2 is either an approximate Newton direction, i.e., a solution to

(6-79)

or a direction of negative curvature,

(6-80)

The philosophy behind this choice of S is to force global convergence (via the steepest descent direction or negative curvature direction) and achieve fast local convergence (via the Newton step, when it exists).

A sketch of unconstrained minimization using trust-region ideas is now easy to give:

  1. Formulate the two-dimensional trust-region subproblem.

  2. Solve Equation 6-78 to determine the trial step s.

  3. If f(x + s) < f(x), then x = x + s.

  4. Adjust Δ.

These four steps are repeated until convergence. The trust-region dimension Δ is adjusted according to standard rules. In particular, it is decreased if the trial step is not accepted, i.e., f(x + s) ≥ f(x). See [46] and [49] for a discussion of this aspect.

Optimization Toolbox solvers treat a few important special cases of f with specialized functions: nonlinear least-squares, quadratic functions, and linear least-squares. However, the underlying algorithmic ideas are the same as for the general case. These special cases are discussed in later sections.

The subspace trust-region method is used to determine a search direction. However, instead of restricting the step to (possibly) one reflection step, as in the nonlinear minimization case, a piecewise reflective line search is conducted at each iteration. See [45] for details of the line search.

Preconditioned Conjugate Gradient Method

A popular way to solve large symmetric positive definite systems of linear equations Hp = –g is the method of Preconditioned Conjugate Gradients (PCG). This iterative approach requires the ability to calculate matrix-vector products of the form H·v where v is an arbitrary vector. The symmetric positive definite matrix M is a preconditioner for H. That is, M = C2, where C–1HC–1 is a well-conditioned matrix or a matrix with clustered eigenvalues.

In a minimization context, you can assume that the Hessian matrix H is symmetric. However, H is guaranteed to be positive definite only in the neighborhood of a strong minimizer. Algorithm PCG exits when a direction of negative (or zero) curvature is encountered, i.e., dTHd ≤ 0. The PCG output direction, p, is either a direction of negative curvature or an approximate (tol controls how approximate) solution to the Newton system Hp = –g. In either case p is used to help define the two-dimensional subspace used in the trust-region approach discussed in Trust-Region Methods for Nonlinear Minimization.

Linear Equality Constraints

Linear constraints complicate the situation described for unconstrained minimization. However, the underlying ideas described previously can be carried through in a clean and efficient way. The trust-region methods in Optimization Toolbox solvers generate strictly feasible iterates.

The general linear equality constrained minimization problem can be written

(6-81)

where A is an m-by-n matrix (m ≤ n). Some Optimization Toolbox solvers preprocess A to remove strict linear dependencies using a technique based on the LU factorization of AT [46]. Here A is assumed to be of rank m.

The method used to solve Equation 6-81 differs from the unconstrained approach in two significant ways. First, an initial feasible point x0 is computed, using a sparse least-squares step, so that Ax0 = b. Second, Algorithm PCG is replaced with Reduced Preconditioned Conjugate Gradients (RPCG), see [46], in order to compute an approximate reduced Newton step (or a direction of negative curvature in the null space of A). The key linear algebra step involves solving systems of the form

(6-82)

where approximates A (small nonzeros of A are set to zero provided rank is not lost) and C is a sparse symmetric positive-definite approximation to H, i.e., C = H. See [46] for more details.

Box Constraints

The box constrained problem is of the form

(6-83)

where l is a vector of lower bounds, and u is a vector of upper bounds. Some (or all) of the components of l can be equal to –∞ and some (or all) of the components of u can be equal to ∞. The method generates a sequence of strictly feasible points. Two techniques are used to maintain feasibility while achieving robust convergence behavior. First, a scaled modified Newton step replaces the unconstrained Newton step (to define the two-dimensional subspace S). Second, reflections are used to increase the step size.

The scaled modified Newton step arises from examining the Kuhn-Tucker necessary conditions for Equation 6-83,

(6-84)

where

and the vector v(x) is defined below, for each 1 ≤ i ≤ n:

  • If gi < 0 and ui < ∞ then vi = xi – ui

  • If gi ≥ 0 and li > –∞ then vi = xi – li

  • If gi < 0 and ui = ∞ then vi = –1

  • If gi ≥ 0 and li = –∞ then vi = 1

The nonlinear system Equation 6-84 is not differentiable everywhere. Nondifferentiability occurs when vi = 0. You can avoid such points by maintaining strict feasibility, i.e., restricting l < x < u.

The scaled modified Newton step sk for the nonlinear system of equations given by Equation 6-84 is defined as the solution to the linear system

(6-85)

at the kth iteration, where

(6-86)

and

(6-87)

Here Jv plays the role of the Jacobian of |v|. Each diagonal component of the diagonal matrix Jv equals 0, –1, or 1. If all the components of l and u are finite, Jv = diag(sign(g)). At a point where gi = 0, vi might not be differentiable. is defined at such a point. Nondifferentiability of this type is not a cause for concern because, for such a component, it is not significant which value vi takes. Further, |vi| will still be discontinuous at this point, but the function |vigi is continuous.

Second, reflections are used to increase the step size. A (single) reflection step is defined as follows. Given a step p that intersects a bound constraint, consider the first bound constraint crossed by p; assume it is the ith bound constraint (either the ith upper or ith lower bound). Then the reflection step pR = p except in the ith component, where pRi = –pi.

active-set quadprog Algorithm

Recall the problem quadprog addresses:

(6-88)

such that A·x ≤ b, Aeq·x = beq, and l ≤ x ≤ u. m is the total number of linear constraints, the sum of number of rows of A and of Aeq.

The medium-scale quadprog algorithm is an active-set strategy (also known as a projection method) similar to that of Gill et al., described in [18] and [17]. It has been modified for both Linear Programming (LP) and Quadratic Programming (QP) problems.

The solution procedure involves two phases. The first phase involves the calculation of a feasible point (if one exists). The second phase involves the generation of an iterative sequence of feasible points that converge to the solution.

Active Set Iterations

In this method an active set matrix, Sk, is maintained that is an estimate of the active constraints (i.e., those that are on the constraint boundaries) at the solution point. Specifically, the active set Sk consists of the rows of Aeq, and a subset of the rows of A. Sk is updated at each iteration k, and is used to form a basis for a search direction dk. Equality constraints always remain in the active set Sk. The search direction dk is calculated and minimizes the objective function while remaining on active constraint boundaries. The feasible subspace for dk is formed from a basis Zk whose columns are orthogonal to the estimate of the active set Sk (i.e., SkZk = 0). Thus a search direction, which is formed from a linear summation of any combination of the columns of Zk, is guaranteed to remain on the boundaries of the active constraints.

The matrix Zk is formed from the last m – l columns of the QR decomposition of the matrix , where l is the number of active constraints and l < m. That is, Zk is given by

(6-89)

where

Once Zk is found, a search direction dk is sought that minimizes the objective function at dk, where dk is in the null space of the active constraints. That is, dk is a linear combination of the columns of Zk: dk = Zkp for some vector p.

Then if you view the quadratic objective function as a function of p, by substituting for dk, the result is

(6-90)

Differentiating this with respect to p yields

(6-91)

q(p) is referred to as the projected gradient of the quadratic function because it is the gradient projected in the subspace defined by Zk. The term is called the projected Hessian. Assuming the Hessian matrix H is positive definite, the minimum of the function q(p) in the subspace defined by Zk occurs when ∇q(p) = 0, which is the solution of the system of linear equations

(6-92)

The next step is

(6-93)

At each iteration, because of the quadratic nature of the objective function, there are only two choices of step length α. A step of unity along dk is the exact step to the minimum of the function restricted to the null space of Sk. If such a step can be taken, without violation of the constraints, then this is the solution to QP (Equation 6-88). Otherwise, the step along dk to the nearest constraint is less than unity and a new constraint is included in the active set at the next iteration. The distance to the constraint boundaries in any direction dk is given by

(6-94)

which is defined for constraints not in the active set, and where the direction dk is towards the constraint boundary, i.e., .

Lagrange multipliers, λk, are calculated that satisfy the nonsingular set of linear equations

(6-95)

If all elements of λk are positive, xk is the optimal solution of QP (Equation 6-88). However, if any component of λk is negative, and the component does not correspond to an equality constraint, then the corresponding element is deleted from the active set and a new iterate is sought.

Initialization

The algorithm requires a feasible point to start. If the initial point is not feasible, then you can find a feasible point by solving the linear programming problem

(6-96)

The notation Ai indicates the ith row of the matrix A. You can find a feasible point (if one exists) to Equation 6-96 by setting x to a value that satisfies the equality constraints. You can determine this value by solving an under- or overdetermined set of linear equations formed from the set of equality constraints. If there is a solution to this problem, the slack variable γ is set to the maximum inequality constraint at this point.

You can modify the preceding QP algorithm for LP problems by setting the search direction d to the steepest descent direction at each iteration, where gk is the gradient of the objective function (equal to the coefficients of the linear objective function):

(6-97)

If a feasible point is found using the preceding LP method, the main QP phase is entered. The search direction dk is initialized with a search direction d1 found from solving the set of linear equations

(6-98)

where gk is the gradient of the objective function at the current iterate xk (i.e., Hxk + c).

Was this topic helpful?